Model Number:NP15LP / 60003121
Compatible Lamp With Housing
Be used in projectors: For NEC M230X
M260W
M260X
M260XS
M271W
M271X
M300X
M300XG
M311X
NP-M230X
NP-M260W
NP-M260X
NP-M260XS
NP-M271X
NP-M300X
NP-M311X.
1. Gather the necessary tools, screwdriver.
2. Turn off the TV or Projector.
3. Remove Lamp Compartment Door.
4. Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don’t get it confused with your new lamp!
5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fibre cleaning cloth to remove any loose dust from the lamp compartment.
6. Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.
7. Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.
8. Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual.
9. You’re Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.